- Overview
-
Cisco 200E Series Smart Switches are a series of affdable smart switches that combine powerful netwk perfmance and reliability with the essential netwk management features you need f a solid business netwk. These scalable switches provide enhanced management, security, and quality-of-service (QoS) features beyond those of an unmanaged switch, at a lower cost than managed switches. And with an easy-to-use web user interface and the Cisco FindIT Netwk Discovery Tool, you can deploy and configure a rock-solid business netwk in minutes. Whether you need basic high-speed connectivity f your computers and servers a comprehensive voice, data, and wireless technology solution, Cisco 200E Series switches can meet your business needs. Possible deployment scenarios include:
• High-speed desktop connectivity. Cisco 200E Series switches can quickly and securely connect employees wking in small offices with one another and with all of the servers, printers, and other device they use. High perfmance and reliable connectivity help speed up file transfers and data processing, improve netwk uptime, and keep your employees connected and productive.
• Secure wireless connectivity. Cisco 200E Series switches wk with Cisco and third-party wireless solutions to extend the reach of your netwk. Employees can wk productively from conference rooms and common areas, collabate in any office, and access business applications from wherever they are. Power over Ethernet (PoE) enables the switch to send power over the netwk cable to power wireless access points and simplifies the wireless deployment. And with embedded security, your employees can wk with confidence, knowing that only authized users can access the netwk and netwk applications.
• Unified communications. The Cisco 200E Series provides QoS features to enable you to priitize delay-sensitive traffic in your netwk and let you converge all of your communications solutions - such as IP telephony and video surveillance - over a single Ethernet netwk. Cisco offers a complete ptfolio of IP telephony and other unified communications products designed f small businesses, and Cisco 200E Series switches have been rigously tested to help ensure easy integration and full compatibility with these and other vend products.
Quick Specs
Figure 1 shows the appearance of SF200E-24P-CN.
Table 1 shows the Quick Specs.
Product Code
SF200E-24P-CN
Capacity in Millions of Packets per Second (mpps) (64-byte packets)
6.55
MAC table
Up to 8192 MAC addresses
Total System Pts
24 Fast Ethernet
2 Gigabit EthernetRJ-45 Pts
24 Fast Ethernet
Combo Pts
(RJ-45 + SFP)2 Gigabit Ethernet combo
Flash
8 MB
CPU memy
64 MB
Dimensions (W x H x D)
440 x 44 x 350 mm
17.35 x 1.74 x 13.8 in.
Unit weight
5.05 kg
11.13 lbs
Power
100V-240V
2.0-1.0A
50-60 HZ
Compare to Similar Items
Table 2 shows the comparison of SF200E-24-CN, SF200E-24P-CN and SF200E-48P-CN.
Product Code
SF200E-24-CN
SF200E-24P-CN
SF200E-48P-CN
Capacity in Millions of Packets per Second (mpps) (64-byte packets)
6.55
6.55
10.12
Total System Pts
24 Fast Ethernet
2 Gigabit Ethernet24 Fast Ethernet
2 Gigabit Ethernet48 Fast Ethernet
2 Gigabit EthernetRJ-45 Pts
24 Fast Ethernet
24 Fast Ethernet
48 Fast Ethernet
Combo Pts
(RJ-45 + SFP)2 Gigabit Ethernet combo
2 Gigabit Ethernet combo
2 Gigabit Ethernet combo
Flash
8 MB
8 MB
8 MB
CPU memy
64 MB
64 MB
64 MB
Power
100V-240V
1.0-.05A
50-60 HZ
100V-240V
2.0-1.0A
50-60 HZ
100V-240V
3.0-1.5A
50-60 HZ
Get Me Infmation
Do you have any question about the SF200E-24P-CN?
Contact us now via daqintech@aliyun.com .
- Specification
SF200E-24P-CN Specifications
Performance
Switching capacity and forwarding rate
Capacity in Millions of Packets per Second (mpps) (64-byte packets)
6.55
Layer 2 Switching
Spanning Tree Protocol (STP)
Standard 802.1d STP support
Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default
Multiple Spanning Tree instances using 802.1s (MSTP)
Link Aggregation
Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
• Up to 4 groups
• Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation
VLAN
Support for up to 256 VLANs simultaneously (out of 4096 VLAN IDs). Port-based and 802.1Q tag-based VLANs
Port-based and 802.1Q tag-based VLANs
Voice VLAN
Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS
Internet Group Management Protocol (IGMP) versions 1 and 2 snooping
IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 128 multicast groups
Head-of-line (HOL) blocking
HOL blocking prevention
Security
IEEE 802.1X (Authenticator role)
802.1X: RADIUS authentication, and, MD5 hash
Port security
Locks MAC addresses to ports, and limits the number of learned MAC addresses
Storm control
Broadcast, multicast, and unknown unicast
Quality of Service
Priority levels
8 hardware queues
Scheduling
Strict priority and weighted round-robin (WRR)
Queue assignment based on differentiated services code point (DSCP) and class of service (802.1p/CoS)
Class of service
Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/type of service (ToS)/DSCP based, Differentiated Services (DiffServ)
Rate limiting
Ingress policer, per VLAN and per port
Standards
Standards
IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1350, RFC 1533, RFC 1541, RFC 1542, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1215, RFC 3416
IPv6
IPv6
IPv6 host mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 neighbor and router discovery (ND)
IPv6 stateless address auto-configuration
DHCP v6 Client
Path maximum transmission unit (MTU) discovery
Duplicate address detection (DAD)
Internet Control Message Protocol (ICMP) version 6
IPv6 QoS
Prioritize IPv6 packets in hardware
Multicast Listener Discovery (MLD) snooping
Deliver IPv6 multicast packets only to the required receivers
IPv6 applications
Web, ping, Trivial File Transfer Protocol (TFTP), DNS client, TELNET, SSH, Bonjour
IPv6 RFCs supported
RFC 2463: ICMP version 6
RFC 3513: IPv6 address architecture
RFC 4291: IPv6 addressing architecture
RFC 2460: IPv6 specification
RFC 2461: Neighbor discovery for IPv6
RFC 2462: IPv6 stateless address auto-configuration
RFC 1981: Path maximum transmission unit (MTU) discovery
Management
Web user interface
Built-in switch configuration utility for easy browser-based device configuration (HTTP). Supports configuration, system dashboard, system maintenance, and monitoring
SNMP
SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 user-based security model (USM)
Remote Monitoring (RMON)
Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack
Coexistence of both protocol stacks to ease migration
Firmware upgrade
Web browser upgrade (HTTP) and TFTP
Port mirroring
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port. A single session is supported.
VLAN mirroring
Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port. A single session is supported.
DHCP (Options 66 and 67)
Dynamic Host Configuration Protocol (DHCP) options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download)
Textview CLI
Scriptable command-line interface
Localization
Localization of GUI and documentation into multiple languages
Other management
HTTP, RADIUS, port mirroring, TFTP upgrade, DHCP client, BOOTP, SNTP, ping, syslog, SSH; cable diagnostics; Telnet client (SSH secure support)
Power Efficiency
Energy Detect
Automatically turns off power on RJ-45 port when the switch detects a link down
Active mode is resumed without loss of any packets when the switch detects the link is back up
General
MAC table
Up to 8192 MAC addresses
Discovery
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions
LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices, which store the data in an MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.
Power over Ethernet (PoE)
IEEE 802.3af PoE delivered on half of the RJ-45 ports within the listed power budgets
Maximum power of 15.4W to any 10/100 Ethernet base port. The total power available for PoE per switch is as follows:
Power Dedicated to PoE
100W
Number of Ports That Support PoE
12
Power consumption
Power Savings Mode
Energy Detect
Power Consumption: Worst Case
110V/P=19.5W
220V/P=19.7W
Heat Dissipation (BTU/hr)
69.04
Ports
Total System Ports
24 Fast Ethernet
2 Gigabit EthernetRJ-45 Ports
24 Fast Ethernet
Combo Ports
(RJ-45 + SFP)2 Gigabit Ethernet combo
Buttons
Reset button
Cabling type
Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T
LEDs
System, Link/Act, PoE, Speed
Flash
8 MB
CPU memory
64 MB
Packet buffer
All numbers are aggregate across all ports, as the buffers are dynamically shared:
64Mb
Supported Small Form-Factor Pluggable (SFP) Modules
Media
Multimode fiber
Single-mode fiber
Single-mode fiber
Single-mode fiber
Multimode fiber
Single-mode fiber
Single-mode fiber
Environmental
Dimensions (W x H x D)
440 x 44 x 350 mm
17.35 x 1.74 x 13.8 in.
Unit weight
5.05 kg
11.13 lbs
Power
100V-240V
2.0-1.0A
50-60 HZ
Certification
UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Operating temperature
32° to 104°F (0° to 40°C)
Storage temperature
-4° to 158°F (-20° to 70°C)
Operating humidity
10% to 90%, relative, noncondensing
Storage humidity
10% to 90%, relative, noncondensing
Acoustic noise and mean time between failures (MTBF)
Fan (Number)
1
Acoustic Noise
N/A
MTBF @ 40°C (hours)
97,338
Warranty
Limited Lifetime
Package Contents
• Cisco 200E Series Smart Switch
• Power cord
• Mounting hardware
• Serial Console Cable
• CD-ROM with user documentation (PDF) included
• Quick-start guide
Minimum Requirements
• Web browser: Mozilla Firefox version 2.5 or later; Microsoft Internet Explorer version 6 or later
• Category 5 Ethernet network cable
• TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network
- Shipping & Payment
Delivery
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL 2-4 business days Fedex 2-4 business days Hong Kong EMS 5-10 business days Hong Kong Air Parcel 10-20 business days By Sea 10-20 business days Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.Deliver to door:
daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.Payment Methods
Paypal Master Card Visa Discover American
ExpressJCB Wire Transfer eCheck WestUnion - Warranty
Warranty
100% Low Price Guarantee:
daqintech.com provides high-quality products at low wholesale prices
All items are ORIGINAL and GENUINE only:
Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year.
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Standard Services
Branch Offices : Hong Kong | USA | UKHong Kong WarehouseShenzhen WarehouseQuality CheckingPackagingShippingRecently Viewed Products
-
SG200-26
US$395.00 -
SF200E-48P-CN
US$809.00 -
SF200E-24-CN
US$235.00 -
SG200-50
US$677.00 -
SF200E-48-CN
US$395.00 -
SF200E-24P-CN
US$470.00