WS-X45-SUP7-E

4.8 11
Model: WS-X45-SUP7-E Catalyst 4500 E-Series Supervisor Engine
Detail: Catalyst 4500 E-Series Supervisor Engine 7-E, 848Gbps
List Price: $24,144.00
Price: $5,831.00
Condition: Brand New Sealed
Availability: In stock
Shipping:
Express Shipping to world
2-10 Days, via DHL, FedEx, EMS, etc. ?
If you finish the payment today,
your order will arrive within the
estimated delivery time.
US$ 0.00 In stock Brand New Sealed

Ask Our Experts

Email

  • +86-755-83613914 (Tel)
  • +86-13824318994 (Mob)
  • 86-755-25524084 (Fax)
Get Quotes up to
2x Faster
Project Inquiry
Overview

WS-X45-SUP7-E, the Cisco Catalyst 4500E supervis engine 7-E, is the leading bderless netwks access and aggregation supervis engine f the Cisco Catalyst 4500E series. Supervis Engine7-E delivers high-perfmance aggregation deployments with increasing Gigabit Ethernet and 10G Ethernet fiber density along with hardware capabilities to suppt enterprise-level aggregation functions.

Notice that WS-X45-SUP7-E= is similar with WS-X45-SUP7-E, except that WS-X45-SUP7-E= is a spare one. 

Quick Spec

Figure 1. WS-X45-SUP7-E Appearance.

WS-X45-SUP7-E Appearance

Table 1.

Product Code

WS-X45-SUP7-E

Centralized switching capacity

848 Gbps

Per-slot switching capacity

48 Gbps

Throughput

250 Mpps f IPv4

125 Mpps f IPv6

250 Mpps f L2 Bridging

IPv4 routing entries

256,000

IPv6 routing entries

128,000

Multicast routes

16,000 (available with Cisco IOS XE 3.1.0 SG)

32,000 (Available with Cisco IOS XE 3.2.0 SG later)

CPU

Dual ce; 1.5 GHz

CPU queues

64

Synchronous dynamic RAM (SDRAM)

2 GB upgradable to 4 GB

Nonvolatile RAM (NVRAM)

1 GB

Security and QoS hardware entries

128,000

Cisco Netwk Admission Control (NAC) andDynamic

Host Configuration Protocol (DHCP) snooping entries

12,000

MAC addresses

55,000

Active VLANs

4,094

Address Resolution Protocol (ARP) entries

47,000

Spanning Tree Protocol instances

10,000

Switched virtual interfaces (SVIs)

4,094

Switched Pt Analyzer (SPAN)

Maximum of 8 sessions: ingress egress

Product Details

Figure 2. WS-X45-SUP7-E can be installed in the Catalyst 4500 switch Chassis.

WS-X45-SUP7-E installed in the switch

Figure 3. WS-X45-SUP7-E Front Panel.

WS-X45-SUP7-E front panel

Note:

① STATUS LED   ② Reset Button   ③ ACTIVE SUP LED   ④ UTILIZATION LED   ⑤ USB Pts   ⑥ Secure Digital Pt   ⑦ Console Pt

⑧ 10/100/1000 MGT Pt   ⑨ 4 × 1G/10G Uplinks SFP/SFP+

Table 2. Recommended Cisco Catalyst 4500E Series Line Cards and Modules.Suppted Line Cards and Modules

Model

Description

WS-X4748-UPOE+E

Cisco Catalyst 4500E Series, 48-pt 802.3af PoE, 802.3at PoEP, and UPoE 10/100/1000

WS-X4748-RJ45V+E

Cisco Catalyst 4500E Series, 48-pt PoE 802.3at 10/100/1000 (RJ-45)

WS-X4712-SFP+E

Cisco Catalyst 4500E Series, 12-pt 10 Gigabit Ethernet (SFP+)

WS-X4748-SFP-E

Cisco Catalyst 4500E Series 48-pt Gigabit Ethernet (SFP)

WS-X4724-SFP-E

Cisco Catalyst 4500E Series 24-pt Gigabit Ethernet (SFP)

WS-X4712-SFP-E

Cisco Catalyst 4500E Series 12-pt Gigabit Ethernet (SFP)

WS-X4648-RJ45V-E

Cisco Catalyst 4500E Series, 48-pt 802.3af PoE 10/100/1000 (RJ-45)

WS-X4648-RJ45V+E

Cisco Catalyst 4500E Series, 48-pt Premium PoE 10/100/1000 (RJ-45)

WS-X4648-RJ45-E

Cisco Catalyst 4500E Series, 48-pt 10/100/1000 (RJ-45)

WS-X4606-X2-E

Cisco Catalyst 4500E Series, 6-pt 10 Gigabit Ethernet (X2)

WS-X4624-SFP-E

Cisco Catalyst 4500E Series, 24-pt Gigabit Ethernet (SFP)

WS-X4612-SFP-E

Cisco Catalyst 4500E Series 12-pt Gigabit Ethernet (SFP)

Datasheet Download

Cisco 4500 Switch Modules Datasheet.pdf

Get Me Infmation

Do you have any question about the WS-X45-SUP7-E?

Contact us now via daqintech@aliyun.com .

Specification

WS-X45-SUP7-E Specification

Chassis compatibility

All Catalyst 4500 E-series switches

Software requirements (minimum)

Refer to your software release notes for the latest software release requirements

Chassis slot restrictions

Catalyst 4503-E: Slot 1 only

Catalyst 4506-E: Slot 1 only

Catalyst 4507R-E and Catalyst 4507R+E: Slot 3 and slot 4

Catalyst 4510R-E and Catalyst 4510R+E: Slot 5 and slot 6

Bandwidth per slot

48-Gbps

Memory

2-GB (upgrade to 4-GB)

STATUS LED

The status LED indicates the current health of the supervisor engine and the current software state.

RESET switch

The RESET switch is used to reset and restart the switch.

Note Use a paper clip or other small, pointed object to press the RESET switch.

ACTIVE SUP LED

The active supervisor engine LED indicates whether the supervisor engine is active or in standby mode in redundant supervisor engine configurations.

UTILIZATION LEDs

Eight LEDs indicate (as an approximate percentage) the current traffic load over the backplane.

USB connectors

Two USB 2.0 ports are provided. Port 1 operates in device mode (upstream) and port 2 in host mode (downstream). Port 1 has a standard Type B USB connector and can be used as a USB console.Port 2 has a USB type A connector and a standard USB 2.0 device like a flash memory device can plug into this connector.

SECURE DIGITAL slot

A standard Secure Data (SD) memory card interface is provided on the front panel

CONSOLE port

This is a 10/100/1000 port that uses an RJ-45 connector. The console port allows you th access the switch either locally (with a console terminal) has an RJ-45 connector. The console port allows you to perform the following functions:

Configure the switch from the CLI

Monitor network statistics and errors

Configure SNMP agent parameters

10/100/1000 MGT port

The Ethernet management port is a Layer 3 host port to which you can connect a PC. You can use the Ethernet management port instead of the switch console port for network management. When managing a switch, connect the PC to the Ethernet management port on a Catalyst 4500 E-series switch.

Note When connecting a PC to the Ethernet management port, you must assign an IP address.

LINK LED

The 10/100/1000 MGT port has a link LED associated with it.

1G/10G UPLINKS (SFP/SFP+) ports

The Supervisor Engine 7-E has four 1-G or 10-G ports that use either SFP transceivers or SFP+ transceivers.

Uplink port LEDs

Each of the four uplink ports has two LEDs associated with it. One LED displays port status when a 1-GB SFP transceiver is installed in the port socket. The second LED displays uplink port status when a 10-GB SFP+ transceiver is installed in the port socket.

Power requirement

302 W

Operating temperature

Certified for operation: 32° to 104°F (0° to 40°C)

Designed and tested for operation: 32° to 130°F (0° to 55°C)

Humidity (RH) ambient (noncondensing)

10 to 90%

Operating altitude

Certified for operation: 0 to 6500 ft (0 to 2000 m)

Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)

Operating temperature

Certified for operation: 32° to 104°F (0° to 40°C)

Designed and tested for operation: 32° to 130°F (0° to 55°C)

Supervisor Engine 7-E Front Panel LEDs

STATUS

The STATUS LED indicates the status of he supervisor engine.

Green—All diagniostic tests have passed

Orange—System boot or a diagnostic test is in progress.

Red—A diagnostic test failed.

Off—The supervisor engine is disabled or is not powered up.

ACTIVE SUP

Indicates whether the supervisor engine is active or standby.

Green—Supervisor engine is active (in redundant supervisor engine configurations)

Off—Supervisor engine is in standby mode (in redundant supervisor engine configurations)

UTILIZATION

When the switch is operational, the eight utilization LEDs indicate the current traffic load over the backplane as an approximate percentage value. Each LED lit green indicates approximately 12.5 percent of load.

MGT port

Indicates the status of the 10/100/1000BASE-T Ethernet management port

Green—The link is operational.

Orange—The link is disabled by user.

Flashing orange—The power-on self-test indicates a faulty port.

Off—No signal is detected or there is a link configuration failure.

Uplink link

Indicates the status of the uplink port

Green—The link is operational.

Orange—The link is disabled by user.

Flashing orange—The power-on self-test indicates a faulty port.

Off—No signal is detected or there is a link configuration failure.

Shipping & Payment

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery OptionsEstimated Delivery Time
DHL 2-4 business days
Fedex 2-4 business days
Hong Kong EMS 5-10 business days
Hong Kong Air Parcel 10-20 business days
By Sea 10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.

Payment Methods

Paypal Master Card Visa
Discover American
Express
JCB
Wire Transfer eCheck WestUnion
Warranty

Warranty

100% Low Price Guarantee:

daqintech.com provides high-quality products at low wholesale prices

All items are ORIGINAL and GENUINE only:

Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.

100% Money Back Guarantee:

If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.

Professional Technical Support:

daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year.

The Support Contacts:

If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Standard Services

Branch Offices : Hong Kong | USA | UK
Branch Offices : Hong Kong | USA | UK
Hong Kong Warehouse
Hong Kong Warehouse
Shenzhen Warehouse
Shenzhen Warehouse
Quality Checking
Quality Checking
Packaging
Packaging
Shipping
Shipping

Recently Viewed Products

Product Tags

daqintech.com is neither a partner of nor an affiliate of Cisco Systems. Logos remain the property of the corresponding company.
Copyright @ 2002-2020 Daqin Technology Co.,Limited | All Rights Reserved.