- Overview
-
The Cisco 1921 Router, which Memy and Flash Memy can't upgrade, is designed f branch offices.
Quick Specs
Figure 1 shows the front view of Cisco Router 1921/K9.
Table 1 shows the Quick Specs of the CISCO1921/K9.
Product Code
CISCO1921/K9
Rack Units
1U
Interfaces
2 integrated 10/100/1000 Ethernet pts: GE0/0&GE0/1
Expansion Slot(s)
2 enhanced High-Speed WAN Interface Card (EHWIC) slots
RAM
512 MB/512 MB
Flash Memy
256 MB/256 MB
Dimensions
1.75 x 13.5 x 11.5 in.
Package Weight
5.41 Kg
Product Details
Figure 2 shows the statue LEDs, on the front panel of the 1921/K9, including three statues: SYS, ACT and PoE.
Table 2 shows the front panel LED area description.
LED
Col
Description
SYS
Solid green
Solid green indicates nmal operation.
Blinking green
System is booting is in ROM monit mode.
Amber
System err.
Off
Power is off system board is faulty.
ACT
Green
Solid blinking when any packets are transmitted received on any WAN LAN, when moniting system activity.
PoE
Green
PoE is available.
Amber
Power supply is not supplying PoE power.
Figure 3 shows the back panel of the CISCO1921/K9.
Note:
① Flash LED ② EN (USB serial console pt) ③ EN(RJ-45 console pt) ④ S (Speed) ⑤ L (Link) ⑥ Baud reset ⑦ Ground connect ⑧ On/Off switch ⑨ USB pt ⑩ Kensington security slot
Table 3 shows the back panel LED area description.
LED
Col
Description
Location
Flash LED
Green
Blinking means software is accessing the internal USB Flash (eUSB) device.
Back Panel
Amber
Initialized with err.
EN (USB serial console pt)
Green
The USB console pt is active.
Back Panel
EN(RJ-45
console pt)
Green
The RJ-45 console pt is active.
Back Panel
S (Speed)
1 blink + pause
GE pt operating at 10 Mb/s.
Back Panel
2 blink + pause
GE pt operating at 100 Mb/s.
3 blink + pause
GE pt operating at 1000 Mb/s.
L (Link)
Green
GE link is established.
Back Panel
Off
No GE link is established.
Figure 4 shows the pts and slots on the back panel of Cisco 1921/K9.
Note:
① EHWIC slot ② Auxiliary pt ③ GE 0/0(down)and 0/1(up) ④ Input power connect ⑤ USB serial pt ⑥ RJ-45 serial console pt ⑦ USB pt ⑧ POE
* Cisco 1921/K9 suppts 1 integrated EHWIC slots f flexible configurations. It suppts two modules:
1. 1 double wide HWIC-D single wide EHWIC/HWIC module 2 single wide EHWIC/HWIC module.
2. High-speed USB 2.0 pts enable another mechanism secure token capabilities and stage.Figure 5 shows the unboxing view of CISCO1921/K9.
Recommended Cards and Licenses
Table 4 shows recommended EHWIC, HWIC, VWIC cards and licenses f this router.
Categy
Models
Description
EHWIC
EHWIC-1GE-SFP-CU
Cisco 1900, 2900, 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU
EHWIC-4ESG
Four pt 10/100/1000 Base-TX Gigabit Ethernet switch interface card f Cisco 1900 2900 3900 Routers
HWIC
HWIC-2FE
HWIC two routed pt Cisco Router High-Speed WAN Interface card
HWIC-1T
1-Pt Serial WAN Interface Card Cisco Router High-Speed WAN Interface card
HWIC-2T
2-Pt Serial WAN Interface Card Cisco Router High-Speed WAN Interface card
VWIC
VWIC3-1MFT-T1/E1
Cisco Voice/WAN Card VWIC3-1MFT-T1/E1
VWIC3-2MFT-T1/E1
Cisco Voice/WAN Card VWIC3-2MFT-T1/E1
VWIC3-1MFT-G703
Cisco Voice & WAN T1/E1 interface moudle VWIC3-1MFT-G703
VWIC3-2MFT-G703
Cisco Voice/WAN Card VWIC3-2MFT-G703
Licenses
L-SL-19-DATA-K9
Cisco 1900 IOS License L-SL-19-DATA-K9= Data E-Delivery PAK f Cisco 1900
L-SL-19-SEC-K9
Security License f Cisco 1900
L-SL-19-APP-K9
AppX License with; DATA and WAAS f Cisco 1900 Series
Datasheet Download
Cisco 1921 Series Router Datasheet.pdf
Get Me Infmation
Do you have any question about the Cisco 1921/K9 router?
Contact us now via daqintech@aliyun.com .
- Specification
-
CISCO1921/K9 Specification
Services and Slot Density
Embedded hardware-based cryptography acceleration (IPsec + SSL)
Yes
RJ-45 onboard LAN/WAN 10/100/1000 ports
2
EHWIC slots
2
Doublewide EHWIC slots (use of a doublewide EHWIC slot will consume 2 EHWIC slots)
1
Cisco Integrated Services Module (ISM) slots
0
Memory (DDR2 DRAM): Default/maximum
512 MB/512 MB
USB flash memory (internal): Default/maximum
256 MB/256 MB
External USB flash-memory slots (Type A)
1
USB console port (mini-Type B) (up to 115.2 kbps)
1
Serial console port (up to 115.2 kbps)
1
Serial auxiliary port (up to 115.2 kbps
1
Integrated power supply
AC and DC power-supply models
Power-supply options
POE (external) - on AC models only
Redundant-power-supply support
No
Power Specifications
AC input voltage
100-240V ~
AC input frequency
47-63 Hz
AC input current range AC power supply (maximum) (amps)
1.5-0.6
AC input surge current
<50A
Typical power (no modules)
25W
Maximum power capacity with AC power supply
60W
Maximum power capacity with PoE power supply (platform only)
70W
Maximum PoE device power capacity with PoE power supply
80W
DC power input
32-60 VDC, 4A, positive or negative, single source
DC input wire size
AWG 14 (2.0 mm2)
Safety ground-wire size
AWG 14 (2.0 mm2), minimum
Wire terminal (lug)
Amp/Tyco No.32957
Overcurrent protection
20A maximum
Physical Specifications
Dimensions (H x W x D)
1.75 x 13.5 x 11.5 in. (4.45 x 34.29 x 29.21 cm)
Rack height
1 rack unit (1RU)
Rack-mount 19 in. (48.3 cm) EIA
Optional
Wall-mount (refer to installation guide for approved orientation)
Yes
Package Weight
11.9 lb (5.41 Kg)
Weight: With AC power supply (no modules)
6.75 lb (3.06 Kg)
Weight: With PoE power supply (no modules)
7.5 lb (3.4 Kg)
Airflow
Back to sides
Environmental Specifications
Operating Conditions
Temperature: 5906 ft (1800m) maximum altitude
32-104°F (0-40°C)
Temperature: 9843 ft (3000m) maximum altitude
32-77°F (0-25°C)
Altitude
10,000 ft (3,000m)
Humidity
10 to 85% relative humidity (RH)
Acoustic: Sound pressure (typical/maximum)
32.99/58.33 dBA
Acoustic: Sound power (typical/maximum)
41.99/67.22 dBA
Transportation and Storage Conditions
Temperature
-40 to 158°F (-40 to 70°C)
Humidity
5 to 95% RH
Altitude
15,000 ft (4,570m)
Regulatory Compliance
Safety
UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950-1
IEC 60950-1
EMC
47 CFR, Part 15
ICES-003 Class A
EN55022 Class A
CISPR22 Class A
AS/NZS 3548 Class A
VCCI V-3
EN 300-386
EN 61000 (Immunity)
EN 55024, CISPR 24
EN50082-1
Telecom
TIA/EIA/IS-968
CS-03
ANSI T1.101
IEEE 802.3
RTTE Directive
- Shipping & Payment
-
Delivery
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options Estimated Delivery Time DHL 2-4 business days Fedex 2-4 business days Hong Kong EMS 5-10 business days Hong Kong Air Parcel 10-20 business days By Sea 10-20 business days Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.Deliver to door:
daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.Payment Methods
Paypal Master Card Visa Discover American
ExpressJCB Wire Transfer eCheck WestUnion - Warranty
-
Warranty
100% Low Price Guarantee:
daqintech.com provides high-quality products at low wholesale prices
All items are ORIGINAL and GENUINE only:
Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year.
The Support Contacts:
If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Standard Services
Branch Offices : Hong Kong | USA | UKHong Kong WarehouseShenzhen WarehouseQuality CheckingPackagingShipping
Recently Viewed Products
-
MEM-CF-256MB
US$220.00 -
MEM-1900-512U1.5GB
US$248.00 -
FIPS-SHIELD-1900
US$193.00 -
CISCO1941/K9
US$586.16 -
C1941-SEC-SRE/K9
US$1,566.00 -
C1921-3G-S-SEC/K9
US$1,320.00